 |
|
|
|
|
Home > EZCPU |
|
THE EZ-CPU CONTROL SYSTEM
Welcome to the EZ-CPU page. The EZ-CPU has been specially developed to teach low level language programming to A-level and degree students. It emulates the 8088 16 bit processor and the very powerful Z80 8 bit processor. There are free teaching resources available and more being developed all the time.
Modified: 20:56, 25 October 2013
|
|
|
|
8-bit CONTROLLER FOR STUDENTS - DESIGNED BY TEACHERS FOR TEACHERS!
|
 |
FEATURES:
|
Z80 & 8088 instruction sets |
8 bit Input & Output ports with 4mm sockets |
16x2 LCD Display |
96 byte user RAM, 256 byte non-volatile program memory |
Selectable CPU speed,1KHz-100KHz |
7-10v DC supply |
2K EEPROM memory for loading and saving up to 8 pages of programs. |
Serial PC connection |
STEP mode for displaying registers and debugging routines. |
|
|
The EZCPU is a fully functional 8-bit emulator designed to teach A-level and University students to write instruction code for 8088 (32 instruction) and Z80 (500 instruction) processors.
The EZCPU system has been designed by teachers, for teachers, to assist in delivery of AQA & OCR Electronics and other syllabus. Tried and tested with students with outstanding success, pupils quickly learn to write control programs and routines.
|
SUPPORT
Purchase of any EDUTEK product qualifies you for free support on-line and advice concerning delivery of the syllabus and use of products purchased. Also free advice on circuit design and fault finding for teachers and students.
|
The EZ-CPU enables control over a variety of applications. Connection to input and output buses uses 4mm sockets and 10 way headers for the expansion modules, which allow for almost any control application and satisfy the requirements of the OCR CONTROL SYLLABUS
There are a range of free worksheets, example flowcharts and notes for teachers and students. |
|
|
|
|
|
|
PROJECTS & APPLICATIONS
A wide range of control projects and applications can be made by adding expansion modules. For example using the 8-bit DAC module, students can create digital waveforms and sound generators.
There are some programs and examples covering most aspects of the module available on the EZ-CPU resource page.
|
 |
The EZ-CPU has a serial connection allowing students to upload their work to a PC for printing and assessment. Download exemplar routines into boards for demonstartions and set tasks.
Software is free!!
Download PC software now - V2.0 - (1.6MB zip)
Unzip the file EZCPUFM200.zip onto the desktop. Open the folder and double-click Setup.exe
Sorry no help file yet - very easy to use though!
|
|
|
|
|
|
|
|
|
SINGLE DIGIT DISPLAY |
|
A single digit 7 segment display with direct connection to segments and decimal point.
Projects: Dice, simple letters.
Code: QSDD
|
2-DIGIT 7 SEGMENT DISPLAY. |
|
This has 2 BCD inputs and 1" green displays.
Projects: Random number generator, counter/timer.
Code: Q2DD
|
4 DIGIT LATCHED DISPLAY |
 |
This latching 4 digit display has a common BCD input and latching inputs to each digit.
Projects: Timer/counter, digital clock, visual effects, games, measurement.
Code: Q4DL
|
STEPPER MOTOR/DRIVER MODULE |
|
A driver module for bi-polar stepper motors. Also can be used to drive individual outputs up to 500mA.
Projects: Puppet controller, solar tracker, clock.
Code: QSMD
|
|
8 BIT DIGITAL-TO-ANALOGUE CONVERTER |
 |
This features AC/DC operation and a resolution of 10mV per step.
Projects: Digital Waveform Generator, Light dimmer
Code: QDAC
|
4-WAY RELAY SWITCH |
|
A 4 way relay switch capable of switching currents up to 3 Amps. Not recommended for mains use.
Projects: Control applications
Code: QRLA
|
7/8-BIT ANALOGUE-TO-DIGITAL CONVERTER |
|
An ADC with either 8-bit or 7-bit + strobe operation.
Projects: Voltmeter, sound meter, measurement, sampling.
Code: DADC
|
ANALOGUE/DIGITAL INPUT MODULE |
|
4 analogue schmitt inputs and 4 digital switch inputs for general purpose use.
Projects: Greenhouse/incubator monitor, burglar alarms,
Code: DAIP
|
|
|
|
|
|
|
CODE
|
DESCRIPTION
|
1+
|
5+
|
10+
|
ECPU |
EZCPU processor board + power lead |
£109.95
|
£99.95
|
£96.95
|
QSDD |
20mm single 7-segment display module |
£7.59
|
£7.17
|
£6.99
|
Q2DD |
25mm 2 digit BCD 7-segment display module |
£9.95
|
£9.14
|
£8.79
|
Q4DL |
20mm 4 digit BCD latched display module |
£14.99
|
£14.81
|
£14.30
|
QSMD |
Stepper motor driver module |
£9.99
|
£9.49
|
£9.19
|
QRLA |
Quad relay module |
£11.95
|
£10.99
|
£10.29
|
QDAC |
8 bit digital to analogue module |
£13.49
|
£13.25
|
£12.99
|
DAIP |
4 analogue/4 digital input module |
£10.95
|
£9.95
|
£9.13
|
DADC |
7/8 bit analogue to digital input module |
£14.99
|
£14.49
|
£13.99
|
DSCR |
4 way servo adaptor |
TBA
|
TBA
|
TBA
|
|
ECON |
10 way module connection lead |
£3.75
|
£3.59
|
£3.46
|
EPWR |
Power Lead |
£1.99
|
£1.81
|
£1.66
|
EPCD |
3.5mm to 9pin serial cable |
£3.49
|
£3.25
|
£2.99
|
Please add £8.50 for postage and packing. Please visit our shop for terms and conditions, and for overseas delivery
All circuit boards are made to the highest quality and free from flux residues.
|
|
BASIC KIT
|
CONTENTS:
- EZCPU - main board+lead,
- DAIP - quad comparator/digital input module
- Q2DD - dual 7-seg display
- ECON - 10 way connector lead x 2.
|
|
1+
|
5+
|
10+
|
EZKTB
|
£129.95
|
£119.97
|
£114.91
|
|
|
ADVANCED KIT
|
CONTENTS:
- EZCPU - main board+lead
- DAIP - quad comparator/digital input module
- DADC - ADC input module
- QDAC - DAC output module
- Q2DD - dual 7-seg display
- Q4DL - quad 7-seg display/latch
- QRLA - quad relay SPDT output module
- DAIP - quad comparator/digital input module
- EPWR - Power lead x 2
- ECON - 10 way connector lead x2
- EPCD - Serial PC connector lead
|
|
1+
|
5+
|
10+
|
EZKTA
|
£189.95
|
£184.95
|
£179.49
|
Software for PC upload/download of HEX files available on our software page - FREE OF CHARGE
|
|
|
|
|
EDUTEK LTD.
22 STROUD LANE,
BOURNEMOUTH.
DORSET, BH23 3QU |
|
Tel./Fax: 01202 474720
Tel: 07714 096258
Contact us by email.
|
|
www.edutek.ltd.uk - Working Electronics For Students & Teachers
|
|
|
|
|
|
|
|